Products

SFT-SeriesI

SFT – Series 1 Economical Digital Pump

Standard Features

  • Self-flushing Pump Head
  • Stainless Steel or PEEK Fluid Path
  • Simple Keypad Controls with LED Display (0.1 ml increments)
  • Single Piston with Electronic Rapid Refill Mechanism
  • Motor Stall Detector
  • RS-232 Serial Com Port for Control & Status Monitoring

High performance at a low cost
The SFT-Series I pump uses new manufacturing techniques and proven fluidics to give the highest performance at the lowest cost.

Wide flow rate range
The SFT-Series I operates from 0.01 mlmin – 10 ml/min at pressure ratings up to 2500 psi; or from 0.1-40 ml/min (650 psi), allowing both analytical and small-scale preparative applications.

Saves bench space
The SFT-Series I requires only 6-1/2 inches by 13 inches deep of valuable bench space.

Choice of materials
The choice of Stainless Steel or PEEK fluid paths make the SFT-Series I ideal for pumping solutions as diverse as distilled water, organic solvents, or radioactive slurries.

Positive seal-washing standard
The exclusive self-flush head extends seal life dramatically by removing salts and wetting the seal.

Easy maintenance
The completely disposable head assembly can be changed in seconds at the price similar to seals and check valves in most pumps.

Flexible advanced control
The SFT-Series I is RS-232C control-compatible and operates with simple commands from any terminal or computer program.

The best performance per money spent
The SFT-Series I represents a class of HPLC pumps for use in critical metering applications and all isocratic HPLC applications where pressure above 2500 psi is not required.

All SFT pumps include a 1-year warranty.

Specifications

10 mL 10 mL w/ Pressure Monitoring & Voltage Control 40 mL 40 mL w/ Voltage Control
Flow Rate 0.01 – 10.0 mL/min. 0.01 – 10.0 mL/min. 0.1 – 40.0 mL/min. 0.1 – 40.0 mL/min.
Max. Pressure 2500 psi 3000 psi (PEEK); 5000 psi (SS) 750 psi 900 psi
Flow Accuracy ± 2% ± 2% ± 5% at midpoint of flow ± 5% at midpoint of flow
Flow Precision 0.5% RSD 0.5% RSD 0.5% RSD 0.5% RSD
Remote Control RS-232 and Run/Stop RS-232 and Run/Stop RS-232 and Run/Stop RS-232 and Run/Stop
Dimensions 6.3″ H x 7.8″ W x 14.2″ D (16.0 x 19.8 x 36.1 cm) 6.3″ H x 7.8″ W x 14.2″ D (16.0 x 19.8 x 36.1 cm) 6.3″ H x 7.8″ W x 14.2″ D (16.0 x 19.8 x 36.1 cm) 6.3″ H x 7.8″ W x 14.2″ D (16.0 x 19.8 x 36.1 cm)
Material PEEK and Inert Polymers – or – Stainless Steel PEEK and Inert Polymers – or – Stainless Steel PEEK and Inert Polymers – or – Stainless Steel PEEK and Inert Polymers – or – Stainless Steel
Power 120/230 Vac; 50/60 Hz 120/230 Vac; 50/60 Hz 120/230 Vac; 50/60 Hz 120/230 Vac; 50/60 Hz

Ordering Information

Series I Pump, 10 mL, PEEK 110PFN01
Series I Pump, 10 mL, Stainless Steel 110SFN01
Series I Pump, 40 mL, PEEK 140PFN01
Series I Pump, 40 mL, Stainless Steel 140SFN01
Series I Pump, 10 mL, w/ Pressure Monitoring & Voltage Control, PEEK V10PFT01
Series I Pump, 10 mL w/ Pressure Monitoring & Voltage Control, Stainless Steel V10SFT01
Series I Pump, 40 mL w/ Voltage Control, PEEK V40PFN01
Series I Pump, 40 mL w/ Voltage Control, Stainless Steel V40SFN01