|
High performance at a low cost
The SFT-Series I pump uses new manufacturing techniques and proven
fluidics to give the highest performance at the lowest cost.
Wide flow rate range
The SFT-Series I operates from 0.01 mlmin – 10 ml/min at pressure
ratings up to 2500 psi; or from 0.1-40 ml/min (650 psi), allowing both
analytical and small-scale preparative applications.
Saves bench space
The SFT-Series I requires only 6-1/2 inches by 13 inches deep of
valuable bench space.
Choice of materials
The choice of Stainless Steel or PEEK fluid paths make the SFT-Series I
ideal for pumping solutions as diverse as distilled water, organic
solvents, or radioactive slurries.
|
Positive seal-washing standard
The exclusive self-flush head extends seal life dramatically by removing
salts and wetting the seal.
Easy maintenance
The completely disposable head assembly can be changed in seconds at the
price similar to seals and check valves in most pumps.
Flexible advanced control
The SFT-Series I is RS-232C control-compatible and operates with simple
commands from any terminal or computer program.
The best performance per money spent
The SFT-Series I represents a class of HPLC pumps for use in critical
metering applications and all isocratic HPLC applications where pressure
above 2500 psi is not required.
All SFT pumps include a 1-year warranty. |
