Monthly Archives: September 2022

AP-159 – Two-Stage Depressurization in Gas Dissolution Foaming: The Production of Nanocellular Materials Free of Defects

Judith Martín-de León,* Victoria Bernardo, and Miguel Ángel Rodríguez-Pérez ABSTRACT: Nanocellular polymethylmethacrylate (PMMA) is produced through a newly proposed method, a two-stage depressurization in the gas dissolution foaming process. This method modifies the depressurization step and allows controlling the pressure … Continue reading

Posted in Client Applications |

AP-158 – Key Production Parameters to Obtain Transparent Nanocellular PMMA

Judith Martín-de León,* Victoria Bernardo, and Miguel Ángel Rodríguez-Pérez Transparent nanocellular polymethylmethacrylate (PMMA) with relative density around 0.4 is produced for the first time by using the gas dissolution foaming technique. The processing conditions and the typical characteristics of the … Continue reading

Posted in Client Applications |

AP-157 – Low Density Nanocellular Polymers Based on PMMA Produced by Gas Dissolution Foaming: Fabrication and Cellular Structure Characterization

Judith Martín-de León *, Victoria Bernardo and Miguel Ángel Rodríguez-PérezCellular Laboratory (CellMat), Universidad de Valladolid, Valladolid 47011, Spain; vbernardo@fmc.uva.es (V.B.); marrod@fmc.uva.es (M.Á.R.-P.) Correspondence: jmadeleon@fmc.uva.es; Tel.: +34-983-184-035 Academic Editor: Michael D. GuiverReceived: 13 May 2016; Accepted: 11 July 2016; Published: 18 … Continue reading

Posted in Client Applications |

AP-156 – Transparent nanocellular PMMA: Characterization and modeling of the optical properties

Judith Martín-de Leóna,∗, Jose Luis Purab, Victoria Bernardoa, Miguel Ángel Rodríguez-Péreza a Cellular Materials Laboratory (CellMat), Condensed Matter Physics Department, Universidad de Valladolid, 47011, Spainb Gds Optronlab, Condensed Matter Physics Department, Universidad de Valladolid, 47011, Spain ABSTRACT: In this work, … Continue reading

Posted in Client Applications |

AP-155 – The influence of cell size on the mechanical properties of nanocellular PMMA

Judith Martín-de Leóna,∗, Frederik Van Loockb, Victoria Bernardoa, Norman A. Fleckb,Miguel Ángel Rodríguez-Péreza a Cellular Materials Laboratory (CellMat), Condensed Matter Physics Department, University of Valladolid, Valladolid, Spainb Engineering Department, University of Cambridge, Trumpington Street, CB2 1PZ, Cambridge, United Kingdom A … Continue reading

Posted in Client Applications |

AP-154 – Overcoming the Challenge of Producing Large and Flat Nanocellular Polymers: A Study with PMMA

Judith Martín-de Leon,* Victoria Bernardo, Paula Cimavilla-Román, Saul Perez-Tamarit, and Miguel Angel Rodríguez-Perez Although nanocellular polymers are interesting materials with improved properties in comparison with conventional or microcellular polymers, the production of large and flat parts of those materials is … Continue reading

Posted in Client Applications |

AP-153 – Highly anisotropic nanocellular polymers based on tri-phasic blends of PMMA with two nucleating agents

Victoria Bernardo a,⇑, Judith Martin-de Leon a, Miguel Angel Rodriguez-Perez a,b a Cellular Materials Laboratory (CellMat), Condensed Matter Physics Department, University of Valladolid, Valladolid, Spainb Instituto BIOECOUVA, Universidad de Valladolid, Valladolid, Spain ABSTRACT: One strategy to produce nanocellular polymers is … Continue reading

Posted in Client Applications |

AP-152 – Supercritical Fluid Extraction of Rare Earth Elements from Nickel Metal Hydride Battery

Yuxiang Yao,† Nina F. Farac,† and Gisele Azimi*,†,‡†Laboratory for Strategic Materials, Department of Chemical Engineering and Applied Chemistry, 200 College Street, Toronto,Ontario M5S 3E5, Canada‡Department of Materials Science and Engineering, University of Toronto, 184 College Street, Toronto, Ontario M5S 3E4, … Continue reading

Posted in Client Applications, Uncategorized |